84-90 Highbury Road Burwood, VIC 3125
Phone 03.9888.9888
8.30am-5.00pm Mon-Fri - 9.00am-1.00pm Sat
Email sales@decorstone.com.au

image displayed if flash reader not installed
Decorative Concrete Seeded Exposed Aggregate | Stacked Stone | Australian Natural Stone Pebbles | Natural Stone Pebbles | PebbleMix Finish for Existing Concrete | Artificial Grass Lawn | Crazy Paving Stone | Water Features and Marble Statues | Recycled Crushed Glass | Decor Glass Finish for Indoor and Outdoor Use | Granite cobblestones on mesh | Creating Green Roofs | Roofscaping

Pebbles Calculator

 

One of the most common questions we get asked is how many bags of pebbles will I need to do my area. Our pebble calculator gives an estimate of how much you will need.

As a general guide:

  • Smaller sized pebbles give better coverage so for the same area you will need less bags of pebbles to complete the job
  • Pebbles when used loose are put down in layers (one on top of the other). For best coverage (you cannot see through the pebbles to the ground below) we recommend a minimum of 2 layers.
  • If cost is an issue you can build the height up under the pebbles using weed mat or various forms of inexpensive crushed toppings.
  • Pebble calculations are made using the 5 bags or more price. The 5 bags can be made up of any colour or size combination.
  • For pebbles that are going to be used in exposed aggregate (seeded into the concrete close together) approximately 1 x 20kg bag per 1.5sqm is needed.

 

 

Select Pebble Type:

   
Layers of Application:  E.g. Laid surface has 1 layer, recommended minimum is 2 layers
Square Meterage:
Amount of Kgs:
Number of Bags:
Cost (inc GST):       AUD

NOTE: If the order is under 5 bags, the price may be charged at retail price.

ALSO NOTE: If the order is above 50 bags, the price will be further discounted.